Views:0 Author:Site Editor Publish Time: 2017-11-20 Origin:Site
Drill bit is a typical drilling tool we often come into contact with, Bring great convenience to drilling work, And the drill bit also has a wide range of types to choose from, in order to meet the different geological conditions, to achieve good drilling results, geological diamond core drill is a good choice.
Before using a geological diamond core bit, First of all, to carry out a scientific and rational installation, Make it a good state to get into work.The first step is to slowly lift the core diamond core box, put the four legs of the drill box into the four holes of the drill turntable.
Followed by the specifications of the geological diamond core drill bit box core board selection，Lifting drill bit core into the drill bit body; Then the drill bit groove to be installed corresponds to the convex tip of the drill core plate, The drill bit into the drill box, this time the drill bit card can be placed on the heart of the turntable; Then turn the geological diamond core drill bit connected to the nut.
After the drilling work is finished, the same shall be done to disassemble the geological diamond core drill in the correct way, After the drilling work is finished, the same shall be done to disassemble the geological diamond core drill in the correct way, First lifting the drill pipe, the drill bit box requirements and turntable connection, Slowly lifting the drill pipe makes the drill groove correspond to the convex tip of the drill core plate, The drill bit stuck in the drill box and in turn drill rod, drill bit.
Geological diamond core drill bit in our drilling work occupies an important position, Therefore, in daily work, the drill must be installed and disassembled in the correct way，In order to achieve the desired work results, but also to extend the service life of geological diamond core drill as much as possible.